cargo doors, How to open and close Options

[pete_auau]

Hi to fscrew2 voice users having problems with my cargo doors, after i say close the cargo doors they close as normal after i pushback and after engine start i notice the cargo doors are open again, tried a different way i dnt use the manager to start fsx and same thing the only difference i noticed the cargo doors were open b4 engine start and [ush back after i called for them to be closed. So was wondering if there is another short cut key to close tham manually thx

This post has been edited by pete_auau: 04/11/2010, 11:45

[Paul Edwards]

Shift+F8 will close the hold doors, however I have found FS2crew to be reliable in closing the doors. The doors will be the last item, just after the harness check. When you hear them close (confirm on the OAP 'All doors closed'), this is the time to do the before start check. I'm sure if you close them manually, they will open at the point when they should be closing as FS2Crew is unable to ascertain the door position.

Regards

Paul

This post has been edited by Paul Edwards: 04/11/2010, 17:43

[pete_auau]

Shift+F8 will close the hold doors, however I have found FS2crew to be reliable in closing the doors. The doors will be the last item, just after the harness check. When you hear them close (confirm on the OAP 'All doors closed'), this is the time to do the before start check. I'm sure if you close them manually, they will open at the point when they should be closing as FS2Crew is unable to ascertain the door position.

Regards

Paul

Thx Paul yea think i found the problem i selected yes in the doors in the fscrew2 config panel, i tried another flight and didnt ask the grn crew to close the cargo door and the cargo doors closed auto and didnt open. Where is the maddog config keys panel since iam unable to located them thx for ur reply

[Paul Edwards]

The maddog key configurations is within the 'Manager & seup' program.

Regards

Paul