 1.51E, details |
|
|
  |
 15/05/2006, 23:15
Post
#1
|
|
 Maddog DevTeam  Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716  |
Here is the changelog:
NEW FEATURES ------------------ - after overhead panel and related systems - new electrical system modelled - IVAP interaction for IVAO users: SQUAWK code depending on ground sensing, it will automatically go on C mode when airborne and in STBY mode when landed as it works on the real MD. It's also now possible to ident via the radio panel instead of IVAP interface FMS --------- - new FMS code FIXES ----------- - improved flare - all FMS issues reported by users - improved flight dynamics - autopilot values and volumes altered when switching full screen/windowed mode issues solved - EDP fuel flow/used now in lbs if lbs selected via the load/setup manager - radio and lower pedestal on the same window - other small changes and improvements Screenshots below
Attached File(s)
--------------------  |
 |
 
|
|
15/05/2006, 23:17
Post
#2
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
-------------------- |
|
|
|
|
15/05/2006, 23:18
Post
#3
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
-------------------- |
|
|
|
|
15/05/2006, 23:19
Post
#4
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
-------------------- |
|
|
|
|
15/05/2006, 23:20
Post
#5
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
-------------------- |
|
|
|
|
15/05/2006, 23:26
Post
#6
|
|
|
200<500 posts  Group: Member Posts: 243 Joined: 09/04/06 From: Tiltonsville, OH USA Member No.: 60 |
  You are making it very difficult to remain patient Stefano !  This looks wonderful ! -------------------- Regards,
Brian |
|
|
|
|
15/05/2006, 23:33
Post
#7
|
|
|
200<500 posts Group: Member Posts: 243 Joined: 09/04/06 From: Tiltonsville, OH USA Member No.: 60 |
Wait a sec.
Do my eyes decieve me ? Have you split the CADC, EFIS, etc ? In preparation for the right seat view in v2 ? 
This post has been edited by BDoney: 15/05/2006, 23:34 -------------------- Regards,
Brian |
|
|
|
|
15/05/2006, 23:35
Post
#8
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
Brian...
  Stefano -------------------- |
|
|
|
|
16/05/2006, 0:04
Post
#9
|
|
 100<200 posts Group: Beta Tester Posts: 132 Joined: 22/04/06 Member No.: 172 |
Looks great.. looking forward to the v1.51E version more and more now!
/Philip Nordlander, -------------------- |
|
|
|
|
16/05/2006, 1:02
Post
#10
|
|
|
0<10 posts Group: Member Posts: 7 Joined: 09/04/06 From: Slovenia Member No.: 65 |
Looks very nice.....
But for my still missing two thinqs: -Auto brake panel -brake temp indicator. Anyway very good progress...
-------------------- www.flythemaddog.com/forum/pilot.gif
|
|
|
|
|
16/05/2006, 18:22
Post
#11
|
|
|
10<50 posts Group: Member Posts: 25 Joined: 05/04/06 Member No.: 37 |
Maddog Team,
All I can say is THANK YOU!!!! Looking forward to the enhancements and to V2!!!! Best Regards, Paul Benoit KSAN |
|
|
|
|
16/05/2006, 19:22
Post
#12
|
|
|
10<50 posts Group: Member Posts: 18 Joined: 11/04/06 Member No.: 100 |
Muy bueno! I can?t see what I?ve seen! Go on with your good work! and take your time... Greetings!
-------------------- www.flythemaddog.com/forum/pilot.gif
|
|
|
|
|
16/05/2006, 19:42
Post
#13
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
Thanks everybody for your kind words!
 I know very well how waiting can be frustrating but don't worry, we're almost ready so expect more news very soon  Stefano -------------------- |
|
|
|
|
16/05/2006, 23:02
Post
#14
|
|
 0<10 posts Group: Member Posts: 8 Joined: 04/05/06 From: Norway Member No.: 225 Callsign: Prycon |
Great work! I'm looking forward to it.
 I really like this plane, and I have always had that FMC key problem, love to see it removed. 
-------------------- Stian Beinset
________ -Prycon- |
|
|
|
|
17/05/2006, 10:43
Post
#15
|
|
|
10<50 posts Group: Member Posts: 36 Joined: 23/04/06 Member No.: 177 |
QUOTE (Stefano @ 16/05/2006, 0:15)  NEW FEATURES ------------------ - IVAP interaction for IVAO users: SQUAWK code depending on ground sensing, it will automatically go on C mode when airborne and in STBY mode when landed as it works on the real MD. It's also now possible to ident via the radio panel instead of IVAP interface How about VATSIM support? I would be happy if the squawk mode in Squawkbox changes with the knob in the aircraft. If you could implement the feature when mode C is activated in the air I would be even happier How about the TCAS? In 1.51 it doesn't work when flyin online. |
|
|
|
|
17/05/2006, 13:49
Post
#16
|
|
|
10<50 posts Group: Beta Tester Posts: 17 Joined: 07/05/06 Member No.: 240 |
Hi to all!
Wow . Good work guys!!!!!I am just waiting (with patience) the new E version. Just great news. I can see that one more thing that I asked Davide longtime ago is included: the fire detector loops. Just brilliant!!!! Best regards, Samuli Keep that good work!!!!!
|
|
|
|
|
17/05/2006, 15:16
Post
#17
|
|
 Maddog DevTeam Group: Admin Posts: 2396 Joined: 06/08/05 From: Italy Member No.: 7 Callsign: I-DAVD |
-------------------- |
|
|
|
|
17/05/2006, 18:55
Post
#18
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
QUOTE How about VATSIM support? Daniel, as we're getting closer to 1.51E release I can only say that there isn't enough time for such an implementation. But stay assured we will consider it for V2. Cheers, Stefano -------------------- |
|
|
|
|
18/05/2006, 13:43
Post
#19
|
|
|
0<10 posts Group: Member Posts: 2 Joined: 17/05/06 Member No.: 323 |
Looks great!
I was wondering a thing, after I saw this in the new features section: FMS --------- - new FMS code Does this mean that we will have fully compatible PMDG SID/STARs? |
|
|
|
|
18/05/2006, 13:57
Post
#20
|
|
|
Maddog DevTeam Group: Admin Posts: 2396 Joined: 06/08/05 From: Italy Member No.: 7 Callsign: I-DAVD |
compatibility as been a little bit improved but to be sure to have 100% working procedures you must follow the guidelins of this http://www.flythemaddog.com/download/1.51/procedures.zip
new FMS code means that there are improvements in the NAV/VNAV algorithm and new or more complete pages implemented. Some of the user interface in the route and dep/arr page have been changed to be exactly as it is in the real FMS. Regards Davide -------------------- |
|
|
|
|
18/05/2006, 14:50
Post
#21
|
|
|
0<10 posts Group: Member Posts: 2 Joined: 17/05/06 Member No.: 323 |
Thanks for the fast reply Davide!
One mix up FMS and FMC quite easily 
|
|
|
|
|
23/05/2006, 9:13
Post
#22
|
|
|
10<50 posts Group: Member Posts: 17 Joined: 10/04/06 Member No.: 81 |
Dear MadDog-Team, THANKS soooo much for the good news...!I do (as we do all here) appreciate your continuing efforts a lot!!!! Keep it up & all the best Petros |
|
|
|
|
23/05/2006, 21:16
Post
#23
|
|
|
10<50 posts Group: Member Posts: 17 Joined: 13/04/06 Member No.: 114 |
Any News on the v. 151 Enhanced progress ? Last week you guys said it was pretty close to release.
Thanks/ Carlos
-------------------- www.flythemaddog.com/forum/pilot.gif
|
|
|
|
|
23/05/2006, 21:34
Post
#24
|
|
|
200<500 posts Group: Member Posts: 327 Joined: 30/03/06 From: EGCC Member No.: 26 |
We can wait
honest
--------------------  I7 920@3.8ghz 6gb Ram, BFG GTX295 1792mb, Windows 7 64bit FS9@FSX |
|
|
|
|
23/05/2006, 22:00
Post
#25
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
Hi,
we're fixing some other issues found by our testers, sorry for this small delay but we'd like to release 1.51E as complete as possible More news to come. Stefano -------------------- |
|
|
|
|
09/06/2006, 13:56
Post
#26
|
|
|
0<10 posts Group: Member Posts: 4 Joined: 11/04/06 From: Frankfurt/Germany Member No.: 92 |
QUOTE (Stefano @ 16/05/2006, 0:15) - IVAP interaction for IVAO users: SQUAWK code depending on ground sensing, it will automatically go on C mode when airborne and in STBY mode when landed as it works on the real MD. It's also now possible to ident via the radio panel instead of IVAP interface Hiya Stefano, first, many thanks for the update! Makes a very good product even better! Now my question regarding the transponder: Is this based on FSUIPC offsets 07xb80 - 07xba1 ? In this case it would work with Squawkbox 3 and FSInn (the VATSIM pilot clients) too ... -------------------- |
|
|
|
|
09/06/2006, 15:24
Post
#27
|
|
|
10<50 posts Group: Member Posts: 18 Joined: 11/04/06 Member No.: 100 |
QUOTE (Stefano @ 23/05/2006, 23:00) Hi, we're fixing some other issues found by our testers, sorry for this small delay but we'd like to release 1.51E as complete as possible More news to come. Stefano You are the best! Excellent! Thanks a lot for the impove! Greetings -------------------- www.flythemaddog.com/forum/pilot.gif
|
|
|
|
|
12/06/2006, 23:27
Post
#28
|
|
|
10<50 posts Group: Member Posts: 39 Joined: 10/06/06 Member No.: 600 Callsign: Coa979 |
QUOTE (Martin Georg @ 09/06/2006, 8:56) QUOTE (Stefano @ 16/05/2006, 0:15) - IVAP interaction for IVAO users: SQUAWK code depending on ground sensing, it will automatically go on C mode when airborne and in STBY mode when landed as it works on the real MD. It's also now possible to ident via the radio panel instead of IVAP interface Hiya Stefano, first, many thanks for the update! Makes a very good product even better! Now my question regarding the transponder: Is this based on FSUIPC offsets 07xb80 - 07xba1 ? In this case it would work with Squawkbox 3 and FSInn (the VATSIM pilot clients) too ... I too hope for VATSIM integration, there are a lot of pilots in our virtual world that would love to see it integrated. BTW thanks for the Sids and Stars, so much easier to punch in a flightplan now. Awaiting news on version 2. -------------------- Karl Kleiber
Proud Maddog pilot |
|
|
|
|
13/06/2006, 9:08
Post
#29
|
|
|
Maddog DevTeam Group: Admin Posts: 2396 Joined: 06/08/05 From: Italy Member No.: 7 Callsign: I-DAVD |
The panel sends the following commands to the online xpndr:
CTRL+F11 to toggle transponder on/off CTRL+F12 to ident I don't know if this apply to VATSIM also... -------------------- |
|
|
|
|
13/06/2006, 12:51
Post
#30
|
|
|
Maddog DevTeam Group: Admin Posts: 145 Joined: 01/08/05 From: Italy Member No.: 2 Callsign: IG716 |
Dear Vatsim users,
is there any key-combo to toggle trasponder and ident via squawkbox? And if yes, what? Maybe there is a chance to implement the IVAO compatibility to VATSIM as well Ste -------------------- |
|
|
|
|
| Lo-Fi Version | Time is now: 20/05/13 - 16:23 |