No tuto for the Maddog 10 ? Options

[bernardc]

Hello,

I have just bought the Full Analog Upgrade, V3.2
(Add Full Analog 2D panel to Fly The Maddog 2008 Professional)

And also ( big error) the Maddog Professional 2010 Edition Upgrade
(Upgrade from Fly The Maddog 2008 Standard to Fly The Maddog Professional 2010 Edition)

( Big error because this upgrade of 19.99 Euro "FLY_THE_MADDOG_PRO_32" is exactly the same as the upgrade of the 2D Full Analog

My question:
Is it normal that, with the Maddog 10 and all the addon full analog, CMA 900, PMS e tuti quanti, the tutorial is still the one of Maddog 2006 dating 2007?

Unless I would have very badly looked, in which case I auto-flagellate and am full of confusion!
Sorry for my funny english

Bernard Caprès FCY-CB

[Davide]

Hi,
yes the tutorial has not changed.
I will check your purchases and eventually refund the wrong one.
Davide

[kero]

Hi Bernard,

Considerate you are lucky.
In my special case, I've bought the Professionnal Edition 2010 just to enjoy flying with different panels.
The problem is : Whichever panel I select, I always get the "Classic Maddog" panel, so no PMS, no full analog panel, that beats everything !!

I asked the question to the forum under the topic : "cannot change panel model", but nobody seems to feel concerned ....

[comanche]

Hi Bernard,

Considerate you are lucky.
In my special case, I've bought the Professionnal Edition 2010 just to enjoy flying with different panels.
The problem is : Whichever panel I select, I always get the "Classic Maddog" panel, so no PMS, no full analog panel, that beats everything !!

I asked the question to the forum under the topic : "cannot change panel model", but nobody seems to feel concerned ....

Dear kero, if you did not get any help from the Forum probably nobody has your problem; personally with 2010 I have no problem in selecting and getting all panels available.
I suggest you to install again Maddog and/or check registration procedure.

Mauro

[kero]

Ok, I followed your advice , I reinstalled it but nothing changes, unable to change the panel model

Here is the first part of my aircraft.cfg ,, just in case ....

[fltsim.0]
title=LSH MD-82 McDonnell Douglas
sim=md-82
model=
panel=analog
sound=
texture=MDG
kb_checklists=md-82_check
kb_reference=md-82_ref
atc_id=MADDOG
atc_airline=McDonnell Douglas
atc_flight_number=
atc_parking_types=GATE,CARGO,RAMP
atc_parking_codes=MDG
ui_manufacturer=Leonardo SH
ui_type=md-82
ui_variation=LSH MD-82 McDonnell Douglas
description=Fly The Maddog edition
visual_damage=0
atc_heavy=0

[GENERAL]
atc_type =MCDONNELDOUGLAS
atc_model =MD80
Editable = 0
performance =Cruise Speed:\t 0.76 Mach\nMaximum Range:\t 2,360 miles\nService Ceiling:\t 37,000 ft\nMax Takeoff Weight: 149,500 lb\nSeating:\t\t 142 (14F 128Y)\nCargo Capacity:\t 1,013 CU ft
Category=airplane









s

[comanche]

Ok, I followed your advice , I reinstalled it but nothing changes, unable to change the panel model

Here is the first part of my aircraft.cfg ,, just in case ....

[fltsim.0]
title=LSH MD-82 McDonnell Douglas
sim=md-82
model=
panel=analog
sound=
texture=MDG
kb_checklists=md-82_check
kb_reference=md-82_ref
atc_id=MADDOG
atc_airline=McDonnell Douglas
atc_flight_number=
atc_parking_types=GATE,CARGO,RAMP
atc_parking_codes=MDG
ui_manufacturer=Leonardo SH
ui_type=md-82
ui_variation=LSH MD-82 McDonnell Douglas
description=Fly The Maddog edition
visual_damage=0
atc_heavy=0

[GENERAL]
atc_type =MCDONNELDOUGLAS
atc_model =MD80
Editable = 0
performance =Cruise Speed:\t 0.76 Mach\nMaximum Range:\t 2,360 miles\nService Ceiling:\t 37,000 ft\nMax Takeoff Weight: 149,500 lb\nSeating:\t\t 142 (14F 128Y)\nCargo Capacity:\t 1,013 CU ft
Category=airplane









s

Your mistake is probably in the Load Manager/Setup. If you choose first Configuration= Mc Donnell Douglas you can get only EFIS,FMS panel because real House aircraft uses only such panel arrangement. If you try to change panel first (i.e. Analog) configuration authomatically changes in "custom" and you can get any panel: the livery is then choosed in "Aircraft visual model".

Mauro

This post has been edited by comanche: 28/09/2010, 9:46