 Active camera |
|
|
  |
 29/05/2009, 22:04
Post
#1
|
|
|
0<10 posts  Group: Member Posts: 3 Joined: 29/05/09 Member No.: 6271  |
Ladies and Gentleman, boys and girls
My first post here since purchasing the Maddoog 2008. I cannot use active camera and have searched the forum. I tried the suggestion of removing the "zorder" entries from the panel cfg but all that happened was that I lost the virtual cockpit and AC still didn't work. I can't even get the exterior walk round working. Does anyone have any ideas ??? (the simpler the better as I'm from the generation that never had a computer at school and now struggels with them at work!!!!!!) Karl ps - whilst I was having a little nose around the panel folder I noticed a series of photo views for the cockpit ie. left, right, rear etc etc but they don't seem to get used, can the be switched from the normal "graphic" views |
 |
 
|
|
30/05/2009, 3:50
Post
#2
|
|
 10<50 posts Group: Member Posts: 35 Joined: 15/08/07 Member No.: 3119 Callsign: AZ1281 |
Hi Karl,
you have to edit the panel.vc-file. The panel.cfg will be overwritten everytime you start FS with the Maddog-Manager. Delete all the zorder-lines in the panel.vc or place a "//" in front of them. After that AC should work. |
|
|
|
|
30/05/2009, 22:04
Post
#3
|
|
|
0<10 posts Group: Member Posts: 3 Joined: 29/05/09 Member No.: 6271 |
QUOTE (Chergo Zelfo @ 30/05/2009, 3:50)  Hi Karl, you have to edit the panel.vc-file. The panel.cfg will be overwritten everytime you start FS with the Maddog-Manager. Delete all the zorder-lines in the panel.vc or place a "//" in front of them. After that AC should work. Thanks for the reply, I'll give it a go. Karl |
|
|
|
|
05/06/2009, 18:57
Post
#4
|
|
|
0<10 posts Group: Member Posts: 3 Joined: 29/05/09 Member No.: 6271 |
All working now,
 Cheers |
|
|
|
 08/06/2009, 19:57
Post
#5
|
|
|
10<50 posts Group: Member Posts: 28 Joined: 18/03/07 Member No.: 2173 |
Forgive my ignorance, this is the first time I hear about "zorder" lines, what is it?
Thank you. |
|
|
|
|
17/04/2010, 1:32
Post
#6
|
|
 0<10 posts Group: Member Posts: 2 Joined: 13/04/10 Member No.: 7329 Callsign: INC512 |
Hi, All Can SomeOne Tell Me What Is the "Zorder".!!? Pleaseee!!!
Fullscreen_capture_2202010_15429_PM1222.jpg ( 79.8K )
Number of downloads: 72 |
|
|
|
|
24/08/2010, 0:50
Post
#7
|
|
|
0<10 posts Group: Member Posts: 1 Joined: 08/08/10 Member No.: 7809 Callsign: HVN240 |
QUOTE (ek002 @ 31/05/2009, 4:04) QUOTE (Chergo Zelfo @ 30/05/2009, 3:50) Hi Karl, you have to edit the panel.vc-file. The panel.cfg will be overwritten everytime you start FS with the Maddog-Manager. Delete all the zorder-lines in the panel.vc or place a "//" in front of them. After that AC should work. Thanks for the reply, I'll give it a go. Karl What's the "zorder" ? i don't understand, please show me a picture ! Thanks ! |
|
|
|
|
| Lo-Fi Version | Time is now: 21/05/13 - 23:59 |