Jump to content

Fly the Maddog X 64bit edition 1.7b753 "official" full and incremental installers released! (P3D v4.4 - v4.5 - v5.0 - v5.1)


Recommended Posts

Hello Captains!

We've just uploaded new "official" full installers to SimMarket!

This new version addresses all bugs reported within the Open Beta program, free for all 64bit edition customers (P3D v4.4/v4.5/v5.0/v5.1).

We have also released incremental installers, here in the forums, that can be installed on top of the previous "full" 1.7b725, or on top of the latest open beta versions: P3D v4.4/v4.5 - P3D v5.0/v5.1.

Changelog:

******1.7b753 - 14/12/2020******
64bit edition - P3D v5.0/v5.1

>>>>[NEW]
*AIRCRAFT SYSTEMS*
- Added P3D v5.1 support;
*GRAPHICS*
- Optimizations for supporting v5.1 Ehnanced Atmosphere (PBR and metallic reflections);
*EFFECTS*
- Fx tuning for P3D v5.1HF1;
*MISC*
- Added Pushover support;
- Added Aviaserver EFB and PMS support;
- Added optional param ZFW= in OFP (PAX= and CARGO= must not be present if ZFW= is used). EFB calculates pax number and cargo load to match the entered ZFW;
- Removed green arc from ND in Canadian/PMS configuration;

>>>>[FIXED]
*AIRCRAFT SYSTEMS*
- Improved core code;
- Changed 'direct to' logic to recompute an idle descent profile when a DCT is made above any waypoint constraint;
- Fixed issue that caused engine failure due to wrong estimate of maximum egt for the selected TRP mode and ART status;
- Fixed issue in VNAV which prevented the aircraft starting descent after passing TOD, if both TOC and TOD where in the same leg;
- No battery drain when the EFB is switched OFF;
- Reverse thrust and flight dynamics fine tuning;
- Removed green arc from ND in Canadian/PMS configuration;
*LOAD MANAGER*
- "Refueled aircraft" and "Automatic update aircraft weight and CG" now separated from the "Realistic mode";
- Load Manager now correctly exports all settings;
- Fixed an issue with FS2Crew activation.
*DOCUMENTS*
- Quick Guide updated to include latest changes;
- User Manual updated to include latest changes;
- OM Vol.2 Ch.2 'Normal Procedures' revision;
- List of Documents updated.

*******************

******1.7b753 - 14/12/2020******
64bit edition - P3D v4.4/v4.5

>>>>[NEW]
*MISC*
- Added Pushover support;
- Added Aviaserver EFB and PMS support;
- Added optional param ZFW= in OFP (PAX= and CARGO= must not be present if ZFW= is used). EFB calculates pax number and cargo load to match the entered ZFW;

>>>>[FIXED]
*AIRCRAFT SYSTEMS*
- Improved core code;
- Changed 'direct to' logic to recompute an idle descent profile when a DCT is made above any waypoint constraint;
- Fixed issue that caused engine failure due to wrong estimate of maximum egt for the selected TRP mode and ART status;
- Fixed issue in VNAV which prevented the aircraft starting descent after passing TOD, if both TOC and TOD where in the same leg;
- No battery drain when the EFB is switched OFF;
- Reverse thrust and flight dynamics fine tuning;
- Removed green arc from ND in Canadian/PMS configuration;
*LOAD MANAGER*
- "Refueled aircraft" and "Automatic update aircraft weight and CG" now separated from the "Realistic mode";
- Load Manager now correctly exports all settings;
- fixed an issue with FS2Crew activation;
*DOCUMENTS*
- Quick Guide updated to include latest changes;
- User Manual updated to include latest changes;
- OM Vol.2 Ch.2 'Normal Procedures' revision;
- List of Documents updated.

Link to post
Share on other sites
×
×
  • Create New...

Important Information

Privacy Policy | Terms of Use